寧波瑞柯微智能科技有限公司
已認證
寧波瑞柯微智能科技有限公司
已認證
振實密度測試儀的標準
1. 概述:Overview
具有設定振次和時間兩種測量方式,具有定質量和定體積兩種測試方法,設計參考人體工學,操作簡單.參照USP(美國藥典)、BP (英國藥典)和EP(歐洲藥典)的規范要求及GB/T31057.2-2018.
顆粒材料 物理性能測試第2部分:振實密度的測量; GB/T5162-2006/ISO3953:1993(金屬粉末 振實密度的測定),中的各項指標。
With set vibration times and time two measurement methods, The design accord with human body engineering, the operation is simple. Meet specification requirements of USP (the United States pharmacopoeia), BP (British pharmacopoeia) and EP (European pharmacopoeia) and GB/T 5162-5162 / ISO3953:1993 (metal powder the determination of tap density),
振實密度測試儀的標準
二、應用范圍:Scope of application
適用于非金屬粉、金屬粉體、制藥、化工、電池、磨料以及科研教學等領域,
It is suitable for non-metallic powder, metal powder, pharmaceutical, chemical, battery, abrasive and research teaching etc field ,
振實密度測試儀的標準
工作原理: Working principle
將粉末量筒固定在機械振動裝置上,振動電機帶動機械振動裝置上下振動,裝有粉末的刻度量筒隨機械振動裝置而發生有節拍的振動,隨著振動次數的增加,量筒里的粉末逐漸振實,振動次數達到設定的次數后,機械振動裝置停止振動,讀出刻度試管的體積,根據密度的定義:質量除以體積、從而求出振實后的粉末密度。
Powder cylinder fixed in the mechanical vibration device, mechanical vibration device vibrate under driven by vibrating motor, the calibration test tubes which containing powder vibrate with the mechanical vibration device, with the increase of vibration frequency, the powder in the measuring cylinder gradually compact by vibration, When vibration frequency reaching setting the number of times, mechanical vibration device will stop the vibration, Read the volume of the calibration test tube, according to the definition of density: mass divided by volume, thus find out the powder density after compaction.
四.各型號及參數描述model and parameter description
功能項目/型號 project/model | FZS4-4 | FT-100B | FT-100A | FT-100CA | ||
1測試工位數 Test station number | 1個 one | 2個 two | ||||
2. 測試數據處理方式 Test data processing method | 人工計算 manual computation | 帶打印+自動計算 With print + automatic calculation | ||||
3. 量筒(玻璃材質)定質量法使用Measuring | 25ml、100ml (選購10ml) | 25ml、50ml、100ml、250ml(選購10ml量筒用于25ml以下樣品測試). | ||||
4. 密度density | 0-9.9999g/cm3 | |||||
5. 測量模式measurement | 振次和時間兩種測量方式 Vibration and time | 振次Vibration | ||||
6. 振幅 range of vibration | 整數1-14mm可調; Maximum 14mm, integer 1-14mm adjustable; | |||||
7. 振動頻率frequency | 0~300 次/分(連續可調)times/ minute. (continuous adjustable) | |||||
8. 振動時間 | time of vibration 0-9999S | 無 | ||||
9. 測試方法 | 定質量法(標配);定體積法(選購不銹鋼組合量筒部件) | |||||
10.定體積法組合量筒 (選購) | 配置不銹鋼量筒25ml;100ml;(或選購10ml量筒用于25ml以下樣品測試). 組合量筒由上套筒和標定體積量筒組成. | |||||
11.參照標準standards | USP、BP 、EP藥典的規范;GB/T5162-2006;ISO3953:1993;GB/T31057.2-2018. | |||||
12.量筒要求Measuring cylinder requirements | 1.容積為Volume 25±0.5ml 允差為±0.25ml; 2.容積Volume 100±1.0ml,允差為±0. 5ml; 3.容積Volume 10±0.2ml,允差為±0.10ml 配置量筒蓋,在振實過程中防粉體向外飛濺性溢出. | |||||
11.重復性repeatability | 誤差Deviation:≤1% | |||||
12.準確性Accuracy | 誤差Deviation:≤1% | |||||
13.測試方法的選擇 | 定質量法適用于:不易粘在量筒上的粉體樣品;定體積法適用于:容易粘在量筒上的超細粉體樣品. | |||||
14.應用領域 Scope of application
| 非金屬粉、金屬粉 、制藥、化工、電池、磨料以及科研教學等粉體顆粒物料Non-metallic powder, metal powder, pharmaceutical, chemical, battery, abrasive and scientific research teaching and other powder particle materials | |||||
15.電源Power supply | 交流Ac 220V(50Hz/60Hz)、40W | |||||
16.使用環境 Operational environment | 濕度小于85%,無凝結現象,無煙塵,無機械振動源或電磁干擾源 Humidity is less than 85%, no condensation, no smoke, no mechanical vibration source or electromagnetic interference source | |||||
17.其他選購項目 Buy items | a.3Q驗證文件 b.隔音箱 c.水分儀 d.粉體真密度儀 e.松裝密度儀 a.3Q verification file b. sound box c. moisture meter d. powder true density meter e. bulk density meter | |||||
五.振實密度試驗所用量筒和樣品量表
樣品量25ml以下時,建議選擇容積為10ml的量筒
量筒(組合量筒)容積/ml | 試驗樣品質量/g | 樣品松裝密度/(g/cm3) |
25 | 100.0±0.5 | >4 |
50.0±0.2 | 2--4 | |
20.0±0.1 | 1--2 | |
100 | 100.0±0.5 | 1--2 |
50.0±0.2 | <1 |
六.部分粉體樣品的振動次數的選擇表
樣品類型 | 振動次數/次 |
咖啡類粉體 | 300 |
藥品類粉體 | 500 |
奶粉類粉體 | 625 |
工業顆粒(水泥、氧化鋁粉等) | 1000 |
金屬類粉體 | 3000 |
注:有其他要求時,由供需雙方協商. |
相關產品
更多
相關方案
更多
企業名稱
寧波瑞柯微智能科技有限公司企業類型
信用代碼
91330205062935784E法人代表
注冊地址
成立日期
注冊資本
有效期限
經營范圍
虛擬號將在 秒后失效
使用微信掃碼撥號