Color analysis is performed within 360 to 830 nm spectral range. Results are displayed in a comprehensive report including meaningful color plots.

Analyze and compare two or more spectra in a single analysis and determine color differences easily.

Last used analysis settings are kept for your convenience. Hence， batch sample analysis becomes a single click application. Save time and money by increasing your analysis efficiency with our color analysis and comparison.

Results of color analysis provide valuable information on e.g. forensic， surface， coating， painting and damage analysis.

Data Preparation：

Analysis is carried out using spectral data in its original spectral resolution or in either 1， 5， 10 or 20 nm resolutions. Required weighting factors are calculated according to ASTM E2022-16 and E2729-16 from tabulated 1 or 5 nm values. Measured sample spectra will be prepared according to methods described by Stearns et. al. improved by Fairman.

Standard Observers：

The following standard observers are used according to CIE S 014-1:2006 and ISO 11664-1:2007 respectively:

2 degrees (CIE 1931)

10 degrees (CIE 1964)