參考價格
面議型號
LH系列品牌
產地
四川成都樣本
暫無看了LH系列立式漿葉混料機的用戶又看了
虛擬號將在 180 秒后失效
使用微信掃碼撥號
簡介: |
工作原理 WORKING PRINCIPLE:
立式漿葉混合機是用來將兩種或兩種以上粉末物料混合為均勻混合物的機械。它依靠?jī)山M快速旋轉的漿葉,推動物料作如下運動(見結構簡圖),1、以N軸為中心的旋轉運動;2、主漿葉將物料從下鏟起物料,使物料作由上向下的渦旋運動。三種運動的組合使多種物料實現均勻混合。
Vertical oar mixer is the machine used to mix two or more kinds of power materials evenly. It depends on double-quick rotate oar-blade to drive the raw materials moving as follows (view the configuration sketch).
產品特點 PRODUCT FEATUERS:
如結構簡圖所示,本機由傳動部分(1,7)、漿葉裝置(2,4)、簡體(3)、出料裝置(5)與支座(6)等部件組成。
傳動部分由電機1、減速機7組成,以合理的轉速帶動漿葉裝置旋轉。 漿葉裝置由主漿葉4和副漿葉2構成,主、副漿葉與水平面傾斜,相錯一定角度,方向相對布置。如圖所示,當傳動部分帶動漿葉裝置沿N方向旋轉時,主、副漿葉帶動物料沿筒壁作圓周移動,同時主漿葉帶動一部分物料沿N1方向向上提升,副漿葉帶動一部分物料沿N2方向向下落,填補主漿葉背面,形成局部物料循環。由于上述復合運動的循環,使物料混合均勻. 筒體3,作盛物料用。
出料裝置5,用于控制物料流出及放料。
支座6起固定定位,支承設備重量的作用。
View-the configuration sketch, the machine is composed of transmission part (1,7),oar-blade set (2,4), cylinder(3), material-discharger(5), foundation(6) and so forth. Transmission part is composed of motor 1 and reducer 7. It can drive the oar-blade set circumrotating at the reasonable rotate speed.
Oar-blade set is composed of main oar-blade 4 and subsidiary one 2. which lean and stagger some angle with the level and are laid relatively in direction. While the transmission part drives oar-blade set rotating along the N direction, the main and subsidiary. Oar-blade will drive the raw materials moving circumferentially, the main oar-blade drives a part of raw materials to exalt along the N1 direction, the subsidiary one does some materials to drop along the N2 direction to fill up the rear of oar-blade and thus forms a part-recycle for the raw materials. Due to the abovementioned complex running recycle, the raw materials are mixed evenly.
Cylinder 3 is used to load the raw materials.
Material-discharger 5 is used to control the outflow and emitting of the materials.
Foundation 6 is used to fixation and support the weight of equipment.
適用范圍 SCOPE OF APPLICATION:
本機轉速較低,運轉平穩,對熱敏性物料不會產生過熱現象,對比重懸殊和粒度不同的物料組成的混合物不會產生分層離析現象。廣泛應用于食品、化工、制藥、飼料、涂料、染料等行業的粉末固體物料的混合。本機為間歇式操作,易于控制混合質量,對固體物料配比經常改變的情況較適應。
The machine is low in revolution, stable in operation, not the superheat phenomena and will not produce the layer and education for the compound whose specific grvity and granularity, are different. It is wide used in foodstuff dusty, dyestuff industry, and so on to mix the raw materials. The machine is operated intermittently, easy to control the quality, of mixing and suitable for the different ration of the solid materials.
技術參數 TECHNICAL PARAMETERS:
|
暫無數據!
一、簡介 三偏磷酸鈉:分子式:(NaPO3)3;分子量:305.92;密度:2.476g/cm3。熔點:627.6℃。白色結晶或結晶粉末;可與H2O2生