水熱法制備鈮酸鍶鋇粉體初探

編號： CPJS00425

篇名：水熱法制備鈮酸鍶鋇粉體初探

作者：夏傲; 丁前; 苗鴻雁; 談國強;

關鍵詞：無機非金屬材料; 水熱法; 鈮酸鍶鋇; 粉體;

機構： 陜西科技大學材料科學與工程學院; 陜西科技大學材料科學與工程學院 陜西咸陽; 陜西咸陽;

摘要： 以BaCl2、SrCO3和Nb2O5的混合物為前驅物,KOH為礦化劑,利用水熱合成技術制備了鈮酸鍶鋇(SBN)粉體。借助XRD、SEM對SBN的晶相組成和微觀形貌進行了分析。結果表明:隨水熱溫度的提高及時間的延長,晶體發育趨于完整;礦化劑KOH濃度為0.5 mol/L時,SBN晶相含量最高;當溫度為240℃,反應時間為24h時,SBN為短軸約0.1μm,長軸約1.0μm的矩形柱狀晶體。 Strontium barium niobate powders were prepared with the precursors of BaCl2﹑SrCO3 and Nb2O5,as well as mineralizer of KOH.The crystal phases and micrographs of SBN powders were analyzed by XRD and SEM.The results indicate that SBN crystal grow more perfectly with the increase of reaction temperature or time,and the content of SBN crystal is the most with 0.5 mol/L KOH.SBN crystal synthesized at 240 ℃ for 24 h is about 1.0 μm in length and 0.1 μm of section size.