電氣工程師Electrical Engineer
細川密克朗（上海）粉體機械有限公司 2018-06-07發布 2018-07-07截止
細川密克朗（上海）粉體機械有限公司 2018-06-07發布 2018-07-07截止
- 工作地點：上海
- 招聘人數：0
- 工作經驗：
- 薪資水平：
- 學歷要求：
- 工作地點：上海
職位描述
1. 在設備現場實際處理程序調試(MISTUBISHI GX PLC, GOT HMI, Siemens S7-300/400 PLC, WinCC flexible 2008), 電氣、儀表接線、故障解決、維修維護、器件更換等工作，并做好相關工作記錄和出差報告。Take responsibility for programming debug(MISTUBISHI GX PLC, GOT HMI, Siemens S7-300/400 PLC, WinCC flexible 2008), electrical wiring, trouble shooting, maintenance, replace of electric parts and instruments in the customer sites, and fulfill relevant working record and travel reports.
2. 根據控制邏輯,電氣圖紙，結合工藝要求，通過電話、郵件或傳真回復客戶提出的問題，給出具體技術性解決方案。Answering customers’ questions regarding electrical issues through telephone, e-mail or fax according to electrical control diagram and processing requirement, and provide the detail technical problem solving proposal.
3. 和機械（或工藝工程師）一起，完成現場項目的調試和性能測試，在滿足合同要求的基礎上完成項目驗收。Finish the project commissioning, performance test and acceptance together with the Mechanical engineer (or processing engineer) in the site according to contracts.
4. 根據控制邏輯要求，理解并繪制控制回路。Understand and drawing control circuit diagram according to control logic.
5. 翻譯集團內產品使用手冊和圖紙并安排寄送給客戶。Translate the operation manual and diagram, and arrange the delivery to the customer of such documentations.
6. 進行相關技術文件的歸檔。Responsible for filing of relevant technical documentations.
7. 參加公司內（或海外）技術及產品培訓，提高自身綜合素養。Take part in the technical and product training arranged by the company to improve self abilities.
8. 向技術部總監匯報工作。Report to Technical Director.
具體內容
1. 大學本科以上學歷（電氣自動化或自動化控制專業）。University degree or above (Major in：Electrical Automation / Automation Control).
2. 三年及以上相關工作經驗; 持有低壓電工操作證。Relevant working experiences for 3 years or above; have “Low voltage electrical operation certificate”.
3. 日語聽說讀寫流利，英語具備聽讀寫能力，能與外方專家就技術問題進行無語言障礙交流。Fluent Japanese in listening, speaking, reading and writing, capable to use English in listening, reading and writing, can communicate with foreign experts in Japanese and English for technical issues smoothly.
4. 能熟練閱讀、理解一般工業電氣控制電路圖（日英文），其中能理解本公司設備、系統的電氣控制圖者優先。Capability to read and understand common industry electrical engineering control diagram n both Japanese and English smoothly, preferably for those candidates who can understand the diagram of our company’s machines and systems.
5. 能夠根據控制原理圖判斷系統故障的可能性。Capability to judge the possible reasons which might cause the system troubles according to the control principle diagram.
6. 熟悉PLC-變頻器使用，熟悉一般的PID（流量、溫度、料位，重量）的原理和控制方法。Familiar with the usage of the PLC inverter, principle and control methods of common PID (flow rate, temperature, material level and weight).
7. 熟悉MISTUBISHI GX, Siemens S7-300 PLC可編程控制器的軟硬件，具備初步編程能力；有非標自動化設備PLC編程經驗者優先。Familiar with the hardware and software of MISTUBISHI GX, SIEMENS S7 300 Programmable controller, and have the basic programming skill.
8. 熟悉人-機界面的基本組態原理，有MISTUBISHI GOT, Siemens WinCC Flexible （ProTools）使用經驗為佳。Familiar with the principle of human-machine interface(HMI), preferably for those candidate who has the experience to use MISTUBISHI GOT, WinCC and WinCC Flexible （ProTools）.
9. 職業意向?yàn)楝F(xiàn)場技術服務人員，有較強的動手能力。Occupation intention is to be a technical service staff at site, has strong practical ability.
10. 能接受頻繁的出差。Be willing to travel frequently.
11. 有強烈的責任心及獨立思考、分析、解決問題的能力。Strong sense of responsibility, capability of independent thinking, analyzing and problem solving.
12. 有良好的人際溝通能力，具有較強的客戶服務意識和團隊合作精神。Good communication skill, strong customer service spirit and team work spirit.
13. 由于工作特殊性和危險性，在工作中必須謹慎并全神貫注, 且有很強的自律性。Has to be well self-disciplined, discreet and always highly concentrated during work time.
1. 在設備現場實際處理程序調試(MISTUBISHI GX PLC, GOT HMI, Siemens S7-300/400 PLC, WinCC flexible 2008), 電氣、儀表接線、故障解決、維修維護、器件更換等工作，并做好相關工作記錄和出差報告。Take responsibility for programming debug(MISTUBISHI GX PLC, GOT HMI, Siemens S7-300/400 PLC, WinCC flexible 2008), electrical wiring, trouble shooting, maintenance, replace of electric parts and instruments in the customer sites, and fulfill relevant working record and travel reports.
2. 根據控制邏輯,電氣圖紙，結合工藝要求，通過電話、郵件或傳真回復客戶提出的問題，給出具體技術性解決方案。Answering customers’ questions regarding electrical issues through telephone, e-mail or fax according to electrical control diagram and processing requirement, and provide the detail technical problem solving proposal.
3. 和機械（或工藝工程師）一起，完成現場項目的調試和性能測試，在滿足合同要求的基礎上完成項目驗收。Finish the project commissioning, performance test and acceptance together with the Mechanical engineer (or processing engineer) in the site according to contracts.
4. 根據控制邏輯要求，理解并繪制控制回路。Understand and drawing control circuit diagram according to control logic.
5. 翻譯集團內產品使用手冊和圖紙并安排寄送給客戶。Translate the operation manual and diagram, and arrange the delivery to the customer of such documentations.
6. 進行相關技術文件的歸檔。Responsible for filing of relevant technical documentations.
7. 參加公司內（或海外）技術及產品培訓，提高自身綜合素養。Take part in the technical and product training arranged by the company to improve self abilities.
8. 向技術部總監匯報工作。Report to Technical Director.
具體內容
1. 大學本科以上學歷（電氣自動化或自動化控制專業）。University degree or above (Major in：Electrical Automation / Automation Control).
2. 三年及以上相關工作經驗; 持有低壓電工操作證。Relevant working experiences for 3 years or above; have “Low voltage electrical operation certificate”.
3. 日語聽說讀寫流利，英語具備聽讀寫能力，能與外方專家就技術問題進行無語言障礙交流。Fluent Japanese in listening, speaking, reading and writing, capable to use English in listening, reading and writing, can communicate with foreign experts in Japanese and English for technical issues smoothly.
4. 能熟練閱讀、理解一般工業電氣控制電路圖（日英文），其中能理解本公司設備、系統的電氣控制圖者優先。Capability to read and understand common industry electrical engineering control diagram n both Japanese and English smoothly, preferably for those candidates who can understand the diagram of our company’s machines and systems.
5. 能夠根據控制原理圖判斷系統故障的可能性。Capability to judge the possible reasons which might cause the system troubles according to the control principle diagram.
6. 熟悉PLC-變頻器使用，熟悉一般的PID（流量、溫度、料位，重量）的原理和控制方法。Familiar with the usage of the PLC inverter, principle and control methods of common PID (flow rate, temperature, material level and weight).
7. 熟悉MISTUBISHI GX, Siemens S7-300 PLC可編程控制器的軟硬件，具備初步編程能力；有非標自動化設備PLC編程經驗者優先。Familiar with the hardware and software of MISTUBISHI GX, SIEMENS S7 300 Programmable controller, and have the basic programming skill.
8. 熟悉人-機界面的基本組態原理，有MISTUBISHI GOT, Siemens WinCC Flexible （ProTools）使用經驗為佳。Familiar with the principle of human-machine interface(HMI), preferably for those candidate who has the experience to use MISTUBISHI GOT, WinCC and WinCC Flexible （ProTools）.
9. 職業意向?yàn)楝F(xiàn)場技術服務人員，有較強的動手能力。Occupation intention is to be a technical service staff at site, has strong practical ability.
10. 能接受頻繁的出差。Be willing to travel frequently.
11. 有強烈的責任心及獨立思考、分析、解決問題的能力。Strong sense of responsibility, capability of independent thinking, analyzing and problem solving.
12. 有良好的人際溝通能力，具有較強的客戶服務意識和團隊合作精神。Good communication skill, strong customer service spirit and team work spirit.
13. 由于工作特殊性和危險性，在工作中必須謹慎并全神貫注, 且有很強的自律性。Has to be well self-disciplined, discreet and always highly concentrated during work time.
細川密克朗（上海）粉體機械有限公司 查看該單位其他職位>>
聯系人：細川密克朗銷售部
電話：021-53068031
地址：上海市延安西路2067號仲盛金融中心2003-2006
細川密克朗（上海）粉體機械有限公司于2005年8月由細川密克朗株式會社投資成立。在集團的領導下，本公司與集團姐妹公司細川阿爾派股份公司、細川密克朗（荷蘭）公司、細川密克朗（英國）公司、細川密克朗國際公司等全球公司共同努力，將符合國際標準的粉體處理設備引進到中國，服務于國內各行業的粉體材料生產商、高校研究所、協會、工程設計研究中心等。 細川密克朗（上海）粉體機械有限公司在穩健的持續發展中，始終致力于為國內客戶提供專業的、綜合性的、系統性的粉體處...詳情
聯系人：細川密克朗銷售部
電話：021-53068031
地址：上海市延安西路2067號仲盛金融中心2003-2006
細川密克朗（上海）粉體機械有限公司于2005年8月由細川密克朗株式會社投資成立。在集團的領導下，本公司與集團姐妹公司細川阿爾派股份公司、細川密克朗（荷蘭）公司、細川密克朗（英國）公司、細川密克朗國際公司等全球公司共同努力，將符合國際標準的粉體處理設備引進到中國，服務于國內各行業的粉體材料生產商、高校研究所、協會、工程設計研究中心等。 細川密克朗（上海）粉體機械有限公司在穩健的持續發展中，始終致力于為國內客戶提供專業的、綜合性的、系統性的粉體處...詳情
